Your Subaru vehicle is engineered to perform at the high level that you need it to for many miles to come around Boston, and if you want to uphold that performance, it's important that you pay attention to the different fluids under the hood. If you need Subaru oil and filter fluids service near Boston, we invite you to let our expert technicians take care of it at North Reading Subaru. Every Subaru vehicle has a multitude of fluids that help it reach its full potential, including motor oil, power steering fluid, coolant, and even windshield wiper fluid.
What to Do When Checking Your Fluids
Before you check your fluids, there are a few things that you should do to get the best results. The first is to park on level ground. If you're parked unevenly, the fluid will also be uneven and result in the wrong levels. You also want to make sure that before you use a dipstick that it's clean and clear of old or dirty fluid to avoid contamination.
Motor Oil
Your motor oil is the lifeblood of your vehicle, as it keeps your engine clean and lubricates the many moving parts to deliver the highest level of performance and efficiency on your trips around Belmont, MA. Your motor oil collects and cleans the dirt and debris that gets into your engine, allowing your engine to perform the way it was engineered to. If you have insufficient or dirty motor oil, it will cause major engine damage and costly repairs.
That's why it's important to keep an eye on your motor oil and get it changed once you see that the oil level is getting low or dirty. When you check your motor oil, make sure that the engine is cold and not running. Pull the dipstick out of the tube and clean it with a cloth before putting it into the oil reservoir. When you pull it out, see if the level is higher than the lowest mark. If it isn't it's time to get an oil change near Lawrence, MA today.
Engine Coolant
With the cold winter weather quickly approaching the Medford, MA area, ensuring that your engine coolant is properly filled and clean is crucial. Your coolant prevents your engine from freezing up in the winter and prevent overheating in the summer. To check the coolant, rais your hood and locate the coolant reservoir, which is usually a clear plastic container that's located near the radiator. It will have two different levels on it, and if the fluid level is below the lower mark, it's time to add more coolant. You could also benefit from flushing out the dirty fluid and replacing it with clean coolant.
Power Steering Fluid
The power steering fluid transmits the hydraulic pressure of your steering system. If you have low or no power steering fluid, it will be very difficult to turn the wheel and make a recognizably bad noise. To check the power steering fluid, you can locate it in a translucent reservoir that will say power steering fluid on the cap. Many vehicles will have a dipstick integrated into the cap, which you should wipe clean and put into the reservoir to check how much fluid is left. If it's below the lowest mark, you should either add fluid or get your fluid flushed out and replaced.
Windshield Washer Fluid
Your windshield washer fluid is crucial to being able to see, whether it's in the rain or snow or when your windshield gets dirty. You can easily identify the reservoir as it's clear and will have a windshield wiper symbol on it. You can see from the outside if its low, and if so, fill it back up with the proper amount of fluid.
Schedule a Service Appointment at North Reading Subaru Today
If you need a Subaru oil change near Boston or any of your fluids replaced, we invite you to schedule a service appointment online today.
